Ethernet Technology
Details:10/100/1000Mbps intelligent adaptive fast Ethernet media converter .It can implement date transmission between twisted pair electrical signals and optical signals which are the two type of network connection media .This type of media converter can extend the transmission distance of a network from 100M over copper wires to 120KM in which there is no help of any other converter.It should be installed in 16 rack media converter chassis when used .
Surporting : Full duplex and half –duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets.
Surporting : The transmission of extra-long packes over VLAN
Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single –mode and single –fiber single –mode, to satisty the extended requirements of users.
3.Technical specifications
| Parameter | Specifications |
| Access mode | 10/100Mbps |
| Standard | IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmission distance | Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pair: 100m |
| Port | One RJ45 connector, connected to STP/UTP category-5 twisted pair One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125µm) Single mode - SC/FC fiber port (fiber size: 9/125µm) Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125µm) |
| Conversion mode | Medium conversion, storing and forwarding |
| MAC address table | I K |
| Buffer space | 1Mbit |
| Flow control | Full duplex state: flow control; half duplex state: back pressure mode |
| Delay | 9.6us |
| Bit error rate | <1/1000000000 |
| MTBF | 100,000 hours |
| LED | Power TX link ( fiber link action ), TP LINK1000, TP LINK100, TP ACT ) FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M) TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action) TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M) |
| Power | AC220 0.5A/PC-48(builtin) |
| Power consumption | 5W |
| Operating temperature | -10~55ºC |
| Operating humidity | 5%~90% |
| Storage temperature | -40~70ºC |
| Storage humidity | 5%~90% (non-condensing) |
| Dimensions | 140mm * 111 * 30mm(in) 95 × 70 × 26mm(out) |